Boatworld Explorer 320 Air V Floor Inflatable Boat
£1,095.00
- Warranty: 3 Years
- Max Engine Capacity: 15hp
- Length: 3.2m
- Weight: 37kg
- Description
- Product Specifications
- Reviews (3)
- Video
- FAQ's (4)
Description
Introducing the Explorer 320. This boat is rugged and ready for anything. The design for this boat is based on the Air V but with some quality upgrades, such as extra reinforcement, grips, accessories and much more. If you’re looking for a boat for coastal cruising, fishing on your local river or going wild camping look no further than the Explorer.
Coming in stealth black with a super wide beam, this boat is ideal for camping trips, exploration or just looking badass. Featuring a high pressure ‘Air V’ floor built into the boat and a maximum engine rating of 15hp this boat is sure to get you on the plane with ease and handle well.
This boat was designed for legendary polar explorer David Scott Cowper. We were tasked with making a tender for the expedition vessel ‘Polar Explorer’ at Southampton 2019. David has more records for sailing the Globe and in particular the North West passage than any other explorer. Needless to say the boat we have designed had to be the ultimate in build quality and robustness to survive all that the Arctic & Antarctic can throw at it.
Features:
- Cat C Rated Boat – Up to 2m high swell.
- High Pressure V Airdeck reinforced underneath in black PVC .
- 2 x black moulded handles fitted to inside of sponsons at stern, just after transom board, for carrying boat from rear.
- 1 x pair of Borika oar rowlocks R1032 c/w large FMP225 base mounts supplied loose
- 2 x pairs of oar clips fitted inside boat tubes for stowing oars
- 1 x pair of oars
- 1 x Borika Fmp224 universal base mount supplied loose
- 2 pieces of black anti-skid/slip matting, fitted centrally on top of tubes running from stern to the bow around 80cm with cut outs for oar rowlocks and Borika mounts.
- 1 x tin of IBS 2 part glue supplied.
- 4 x passenger grab handles on tubes at bow
- 2 x Davit rings mounted on transom board
- 2 x Davit rings mounted on inside of boat at bow
- 1 x s/s ring on inside of boat at bow for anchor bitter end
- 1 x s/s ring on outside of boat at bow for tying off or tow line
- c/w storage bag
- c/w high pressure stirrup pump
- c/w repair kit
- c/w 2 x sliding aluminium seats
Product Info & Care
| Weight | 30000 g |
|---|---|
| Brand | Boatworld |
| Boat Beam | 1.7m |
| Boat Length | 3.2m |
| Boat Range | Air V-Type |
| Boxed Size (cm) | 122x72x40cm |
| Chambers | 3 + Floor (2) |
| Floor Type | Air V |
| Max Engine Power | 15hp |
| Max Loaded Weight | 725kg |
| Net Weight | 37kg |
| Passenger Capacity | 4 adults + 1 child |
| Warranty | 3 Years |
| gtin | 5060704732497 |
3 reviews for Boatworld Explorer 320 Air V Floor Inflatable Boat
Add a review
-
Hi could you confirm the inside measurements please? The listing says internal area of 240x 93 but that would make it bigger than the carbon 365. It says boat beam is 170 and tubes are 45cm yet has a floor width of 93cm! I am considering buying this so any help would be much appreciated.
- QHi could you confirm the inside measurements please? The listing says internal area of 240x 93 bu...... Read moreA
Hi there,
Thank you for your question.
The tubes over hang on the inside of the boat so the floor goes slightly under the tubes, I hope that makes sense!
I have checked all the measurements on the boat this morning and can confirm the listing is correct.
Kind regards!
Which pump connector is needed to fit the valves on the Explorer 320? What pressures are needed for the tubes and floor? - QWhich pump connector is needed to fit the valves on the Explorer 320? What pressures are needed f...... Read moreA
Thank you for your question.
Our boats use the halkey roberts valves for inflation. The pressures for the tubes should be max. 0.25bar and the floor max. 0.6bar.
Should this have a short shaft outboard engine? - QShould this have a short shaft outboard engine?A
Yes this boat requires a short shaft outboard. Hope this helps.
Are the seats integral to the structure and stability of the vessel, or can she be run without them? - QAre the seats integral to the structure and stability of the vessel, or can she be run without them?A
Hi there
Whilst the seats can help provide some rigidity, they are not necessary for the boat to perform well. Hope this helps.
Stephen pemberton (verified owner) –
As soon as boat arrived I was amazed how well the boat was put together . Some real thought has gone into this boat protection in the tubes and floor best boat out if 4 that I’ve owned
Mark –
Well done Boatworld love this boat , well made fantastic price and black , what not to like 👍.
Keep up the amazing work Boatworld . 👍❤️
Mark –
Second part to my review, this is an awesome boat definitely recommended to everyone it’s light and very fast with my 9.8hp two stroke getting up to 20mph . Would love to see a 360 or 380 version of this .
Don’t hesitate buy a Boatworld great value and quality. 👍👌👏❤️