Borika FASTen Fish Finder Plate with Pivot for 7in Screen

Description

Product description:

• This plate is distinguished by a stylish design and the highest possible reliability, which are achieved due to the use of aluminum alloy, covered with a black anode layer as the material of the plate itself.
• Is suitable for any vessel and is intended to mount Garmin, Lowrance, Raymarine and Humminbird fish finders with a screen size up to 7″, maximum distance between mounting points must be up to 95 mm.
• There are fourteen mounting holes, which coincides with the mounting holes on the bracket of popular fish finder models. If necessary, the user can drill additional ones.
• The plate is covered with anode layer, which provides not only stylish matte black color, but also additional protection of the metal against rusting and negative environmental influences.
• There are two oblong holes along the perimeter of the plate, which are designed by analogy with the modular MOLLE system and allow additional accessories, for example, soft BORIKA FASTen® pouches for gear and equipment be secured on the plate. This makes the product even more functional, helping to organize the space on the vessel, which is especially important for small boats and kayaks.
• This model also includes several adapters: the SBa038 ball & socket adapter can be easily disassembled into an Ab038 ball and an Sb038 socket. This type of joint allows full rotation around the sphere, so the position of the screen can be easily and quickly changed.
• Using the socket as a conversion adapter, the structure can be installed on mounting systems from other manufacturers equipped with a ball of the same size (1.5″).
• The plate is compatible with all BORIKA FASTen® mounting systems and mounts (FMb, FMp224, FMa, Fs218, extended mounts, mounts on the round rails, etc.).

Materials: aluminium with black anode layer, fiberglass-reinforced polyamide, polyurethane, A2 (AISI 304) stainless steel, brass.

In the package: an SLr110 plate.

Tips on using & installation:

• The base of the fish finder monitor can be fastened to the plate using screws in accordance with the step-by-step installation guide. You can use ready holes or make your own ones which will suit your equipment.
• Please note that you can complement the plate with any other adapters and extenders or completely replace the set of adapters that are included in the assembly, for example, with an adapter with a spline tilt joint. For this, a compact mount is provided under the plate surface, which is suitable for fixing any BORIKA FASTen® a male adapter shaped as a 12 pointed star. After the end of fishing, the entire structure can be removed from the mount in one motion, without having to dismantle the equipment.
• To prolong the service life of the product, after using it in sea water, rinse it with plenty of fresh water.

Product Info & Care