Order before 3pm for Next Working Day Delivery More Info

Polar Bound Signature Model

Polar Bound Signature Model


This item will be released 26 May 2021.
Availability: 4 available for pre-ordering SKU: PB1


Boatworld are the proud supplier to Legendary Polar Explorer David Scott Cowper. David met us at the Southampton 2019 Boatshow to discuss details and the supply of an inflatable tender for his expedition vessel “Polar Explorer”. David has more records for sailing the Globe and in particular the North-West passage than any other explorer.

Needless to say, the boat we have supplied has to be the ultimate in build quality and robustness to survive all that the Arctic & Antarctic can throw at it. A limited number of these custom build boats are available to purchase, the ultimate in small inflatable boats. These have been constructed to David’s specification and design.


  • High-Pressure V Airdeck reinforced underneath in black PVC.
  • 2 x black moulded handles fitted to inside
    of sponsons at the stern, just after transom board, for carrying boat from rear.
  • 3 pairs x black moulded handles supplied loose for fitting shoulder-width apart ( 70cm ) on each side, designed for 2 people to carry the boat at its approximate weighted balance point and /or fitting at the bow of the boat.
  • 1 x pair of Borika oar rowlocks R1032 c/w large FMP225 base mounts supplied loose
  • 2 x pairs of oar clips fitted inside boat tubes for stowing oars
  • 1 x pair of oars
  • 1 x Borika Fmp224 universal base mount supplied loose
  • 2 pieces of black anti-skid/slip matting, fitted centrally on top of tubes running from stern to the bow around 80cm with cutouts for oar rowlocks and Borika mounts.
  • 1 x 2mt roll of anti-slip matting supplied loose to fit as required
  • 1 x tin of IBS 2 part glue supplied.
  • Boat length: 10’6” ( 3.2m).
  • Boat tube diameter: 17.5-18”( 45cm).
  • Beam of boat: 5’ 9” (1.7m)3.2m
  • Cat C
  • Max engine rating 15hp
  • 4 x passenger grab handles on tubes at the bow
  • 2 x Davit rings mounted on transom board
  • 2 x Davit rings mounted on inside of boat at the bow
  • 1 x s/s ring on the inside of boat at the bow for anchor bitter end
  • 1 x s/s ring on the outside of boat at the bow for tying off or tow line
  • c/w storage bag
  • c/w high-pressure stirrup pump
  • c/w repair kit
  • weight 37kg
  • c/w 2 x sliding aluminium seats

Additional information

Weight 45000 g


There are no reviews yet.

Be the first to review “Polar Bound Signature Model”

You've just added this product to the cart: